Published:
Work Instruction Template: Free Excel Download and Manufacturing Examples

Photos, actions and acceptance criteria make a manufacturing work instruction useful at the workstation. A document is easier to follow when each row shows one step, the relevant photo, the action to perform and the points that must be checked.
This guide explains how to write a photo-based work instruction using Ollo’s free Excel template. The completed example covers ten steps for assembling, disassembling and storing a toy vehicle. Replace its photos, parts, tools and example conditions before using the template in production.
- Free work instruction template: what is included
- How to write a manufacturing work instruction
- 1. Define the operation and the person who will use it
- 2. Observe an experienced operator
- 3. Put one meaningful step in each row
- 4. Write checks that can be verified
- 5. Add photos and measured times
- 6. Check the instruction with its intended user
- Editing, printing and keeping the latest revision
- Common questions about work instructions
- Does every step need a photo and a time?
- Is Excel better than video?
- Summary: make each step observable and verifiable
- Create work instructions from video with Ollo Factory
Free work instruction template: what is included
⬇ Download the free work instruction template — no email required

The workbook includes three sheets:
Work instruction: a blank form with space for ten steps.
Example: a completed instruction with photos and illustrative times.
Instructions: guidance on editing, printing and revision control.
The form has columns for step number, photo, step name, instructions, key points and time in seconds. Its header identifies the operation, author, creation date, document ID, revision, applicable parts, approver and effective date. It does not have separate fields for every tool or precondition. Record those in an appropriate opening step or refer to an approved preparation checklist.
The sample is a training example, not an approved production method. Its times must not be adopted as standard times. Instructions such as “fully seated” also need a defined acceptance criterion for the actual part.
How to write a manufacturing work instruction
1. Define the operation and the person who will use it
Choose a clear start and finish, such as checking the part number through completing a bracket installation inspection. State the applicable part numbers and equipment. Decide what the reader already needs to know, including required qualifications and prerequisite safety training.
Keep a workstation instruction focused on the operation. A broader manual can explain the full process, while the work instruction shows the actions and checks needed at a specific point of use.
2. Observe an experienced operator
Watch the actual work and ask why important actions are performed. Record the sequence, identification points, inspection conditions and response to an abnormality. Distinguish an approved method from a personal workaround before documenting it.
For an automotive component assembly, check how the operator identifies the bracket, aligns it in the fixture, tightens it and confirms the installed condition. “Attach the bracket” alone does not explain orientation or the required check.
3. Put one meaningful step in each row
Use a short action name in Step, then explain the object, action and sequence in Instructions. For example, “Align bracket” can be followed by a description of the approved reference surfaces and orientation. Use the terms shown on the part drawing or workstation labels consistently.
Split a row when it contains several actions that need separate photos or checks. Keep an action and its immediate verification together when separating them would make the sequence harder to follow.
4. Write checks that can be verified
Use Key points for quality requirements, safety precautions and reasons behind critical actions. Replace vague phrases such as “tighten properly” with the approved condition or an exact reference to the relevant specification. Do not invent a torque or tolerance to fill the form.
Quality: what must be checked and what passes or fails.
Safety: hazards, prohibited actions and approved protective measures.
Technique: a practical point that helps achieve the approved result.
5. Add photos and measured times
Use an action photo to show hand position, tool direction or the relationship between the part and fixture. Use a photo with the hands removed when the reader needs to inspect the finished position. Photograph acceptable and unacceptable examples from the same angle if a comparison is necessary.
Show enough context to identify the location. Add a small number of arrows or labels and use the same identifiers in the text. A photo cannot reliably communicate a tightening torque, inspection tolerance or escalation contact, so keep those conditions in writing.
Record seconds only after measuring with consistent start and finish points. Leave unmeasured times blank. The sample’s ten steps include preparation, wheel fastening, fitting and removing the cover and cargo bed, storage and recording; they demonstrate the form rather than an industrial standard.
6. Check the instruction with its intended user
Ask a less experienced operator to follow the draft under suitable supervision. Note where they hesitate, ask questions or interpret a photo differently. Revise the relevant step, then obtain the required quality and safety approval before release.
Editing, printing and keeping the latest revision
When creating an instruction for a new operation, copy the blank Work instruction sheet and enter that operation’s photos and steps in the copy. Rename it for the operation and keep the original blank sheet for the next instruction. For more than ten steps, add a continuation sheet, keep the document ID and revision consistent and continue the step numbering.
The supplied instruction and example sheets use A3 landscape, one page wide and two pages tall. After adding photos or changing paper size, check print preview for clipped text, shifted photos and page breaks. Check legibility at the distance from which the document will actually be read.
Review the instruction when parts, tools, equipment, layout or inspection conditions change, or when a defect, near miss or repeated question exposes a gap. Update the text, photos and referenced drawing revisions together. Record the change, approval and effective date, replace obsolete copies and explain the change to the people using it.

Common questions about work instructions
Does every step need a photo and a time?
Use a photo where it helps identify an action or condition. Record a time only when it has been measured for a defined purpose. Completing every cell is less important than providing accurate instructions and verifiable checks.
Is Excel better than video?
Excel is useful for a controlled printable format and quick checks at the workstation. Video can show movement and sequence. Choose the combination that fits access, update and approval requirements rather than treating one format as universally better.
Related reading:
Manufacturing Skills Matrix: Free Excel Template and Rating Examples
Time Study in Manufacturing: Method, Example and Free Excel Template
Standard Work Combination Sheet: Free Excel Template and How to Use It
Summary: make each step observable and verifiable
Match each step to a photo, an action and the necessary checks.
Replace sample content with approved conditions for the actual operation.
Test, approve and revise the instruction at the point of use.
AI can reduce the work of drafting steps from video and transferring them into a consistent format. The resulting instruction still needs the same checks and approval as a manually prepared document.
Create work instructions from video with Ollo Factory
Ollo Factory is a manufacturing-focused work analysis AI. It can analyze an uploaded work video to draft a sequence of steps and descriptions. An existing Excel instruction template can be imported so the analyzed steps can be downloaded in that format.
This workflow is useful when several teams need to create instructions in a common layout. Review the extracted sequence, terminology, photos and safety and quality conditions before issuing the document. The same work video can also support analysis and operator training, helping teams connect documentation with how the operation is actually performed.

Product screen published on Ollo’s English website. It illustrates the feature, not the results of the fictional assembly example in this article. Explore Ollo Factory features.
About the author
K.Y. | Business Development Lead & Marketing, Ollo Inc.
K.Y. leads business development and marketing at Ollo Inc., an AI startup originating from the Matsuo Laboratory at the University of Tokyo and the developer of Ollo Factory, a work analysis AI for manufacturing.
After studying engineering and design at university, K.Y. joined a major automaker and worked on new electric-vehicle development, from design through factory production, including hands-on assembly-line training. K.Y. later worked in sales and marketing at a manufacturing startup.
Today, K.Y. helps manufacturing teams use AI to improve the way they work through Ollo Factory.
Back to articles
See how Ollo Factory can support your factory
Book a demo
• See the product in action
• Discuss your production needs
• Explore available plans
Book a demo

Request a brochure
• Customer stories
• Key features
• How to get started




