Published:
Training & Standardization
How to Create a Standardized Work Chart

Standard work sheet: a document that shows the sequence of operations, movement paths, and the number and location of required spare parts in the equipment and component layout diagram.
This article introduces six steps and sample entries for creating a standard work sheet using the example of automobile component unit assembly. Determine a cycle for one worker to perform, and verify whether the movement depicted in the diagram is feasible in the field.
- What to include in the standard work sheet and what to confirm in other documents
- Six steps for creating a standard work sheet
- 1. Determine the start and end points of the work
- 2. Draw the positions of equipment and components
- 3. Assign work numbers
- 4. Draw the movement line
- Indicate the location and quantity of standard hand tools.
- 6. Show quality and safety checkpoints
- Unit assembly fill-in example
- After writing, reproduce one cycle in the field
- Common failures and correction methods
- Diagram is complete but unusable in the field
- Standard material constitutes field inventory confirmation
- Walking time remains unchanged after changes.
- Summary: Share layout, sequence, and standard hand-hold on one sheet.
- "Ollo Factory," a manufacturing-specialized work analysis AI that automates standard work form creation work analysis and procedural organization.
- ① Confirm movement and work segments in video.
- ② Compile task sequence and confirmation points into the draft.
- Watch Ollo Factory’s Video Manual AI in Action
What to include in the standard work sheet and what to confirm in other documents
Information shown in the standard work sheet | Content for the reader to verify |
|---|---|
Target process, part number, personnel, and version | Under what conditions to use the standard |
Positions of equipment, fixtures, components, and finished products | Where to work and what to retrieve |
Work number, sequence, and movement line | From start to finish, return to the next cycle |
Position and quantity of standard hand tools | Spare parts required to ensure continuity |
Confirmation positions and reference points for quality and safety | When and what to verify in which situation |
Related conditions such as takt time and cycle | Design based on which pace |
Do not overload the standard work sheet with detailed information; supplement with the following documents.
Overlap of human and equipment time:Standard work combination sheet
Processing capacity of equipment and processes:Process capability table
Individual operations and photo-accompanied explanations:Work procedure sheet
By dividing roles, you can avoid overcrowding a single layout diagram with text.
Six steps for creating a standard work sheet
1. Determine the start and end points of the work
In the example, one cycle is defined as the worker starting from the front of the component box, placing the finished product, and returning to the same starting position. Do not omit the movement back to the start position, as this may cause the walking path for the next cycle to be missing.
Record part number, component box height, equipment conditions, and personnel. If the movement varies by variety, determine the extent to which it can be included in a common document, and do not force different operations onto a single document.
2. Draw the positions of equipment and components
Draw a diagram that accurately replicates dimensions while distinguishing from precise technical drawings, ensuring the actual spatial relationships are clear. Include fixtures, fastening tools, inspection indicators, component boxes, and finished product placement areas, and indicate passageways and restricted approach zones as necessary. If similar-looking components are placed adjacent to each other, confirm methods to prevent misplacement.
3. Assign work numbers
Number the operations as follows: "① Component matching → ② Set to fixture → ③ Fastening → ④ Inspection result confirmation → ⑤ Finished product placement → ① return." Number the operations at the location where the work occurs. Using the same numbers in time analysis and procedure sheets allows for direct movement to the relevant details from the diagram.
4. Draw the movement line
Connect the work numbers in sequence, verifying the intersection of round trips and movement lines. Do not forget to depict the movement from the final operation back to the start position. Record tool search and temporary component replenishment in the current observation record, distinguishing them from the standard movement line adopted after improvement.
Indicate the location and quantity of standard hand tools.
Standard work sheet is the minimum material required to repeat operations in a defined sequence. Units are measured in quantity, and locations are noted. Include items in processing and inspection stages within the equipment. Example: Verify if material is needed to prepare the next component during automated inspection, based on human-equipment time relationships.
Indicate required material locations and quantities as "Automated inspection: 1 unit." Avoid including items that simply wait for the next stage or the entire supply box in the standard material. Justify quantities using combination tickets and confirmation of one cycle in the field.
6. Show quality and safety checkpoints
Specify locations for component orientation, seating, completion indicators, inspection pass/fail, etc. Use concise terms in diagrams; elaborate on approved condition tables and procedures. Use company-defined safety symbols, with meanings in legends.
Unit assembly fill-in example

Confirm movement from arrow ① to final operation, then back to start position. Link quality and safety checks to specific work numbers.
The diagram is a fill-in method guide. Verify actual dimensions, equipment range, operator posture, material quantity in the field. Do not base layout solely on distance; ensure accessibility, visibility, pathways, and safe workspace.
Work number | Location | Points to confirm | Example for detail reference |
|---|---|---|---|
① | Component box | Matching part number and actual item display | Component matching procedure |
② | Fixture | Specified orientation and seating state | Photo-illustrated set method procedure |
③ | Sealing machine | Specified conditions and completion indicators | Approved version of sealing condition table |
④ | Automated inspection unit | Handling for pass/fail and abnormal cases | Inspection standard and isolation procedure |
⑤ | Finished product storage area | Place approved product in designated location | Rules for transport and identification |
Video-based confirmation of work sequence and time, linking to procedure organization and form creation AI feature introduced in Ollo Factory product documentation.
After writing, reproduce one cycle in the field
Review the diagram with the operator to confirm one cycle’s movement. Identify any unshown walking, body twists to view displays, or return to start position. Reducing path length does not imply improvement if hands become inaccessible or inspection indicators disappear.
When testing changes, align part number, conditions, and checkpoints, verifying time as well as quality and workload. Approve and revise the ticket after confirmation, updating related combination tickets and procedure documents.
Common failures and correction methods
Diagram is complete but unusable in the field
Verify causes: insufficient required numbers or legends, mismatched field orientation and diagram orientation, unclear latest version, ensuring actual display size and readable state on device.
Standard material constitutes field inventory confirmation
Without investigating the reason for high in-process stock quantities, writing the quantity as a standard may obscure inter-process delays. Separate consideration is required for "quantity needed to run the process" and "quantity maintained for supply/stop measures."
Walking time remains unchanged after changes.
Correcting layout diagrams alone does not update the basis for time analysis. Re-measure movement ticket shifts and confirmation segments, and align conditions and versions.
Summary: Share layout, sequence, and standard hand-hold on one sheet.
Include start position, work sequence, and movement in equipment and component layout diagrams.
Record standard hand-hold and safety/quality confirmation points in locations corresponding to them.
Replicate one cycle on-site and resolve discrepancies with other forms or actual work.
Observing work before entering layout diagrams requires time. AI can automate video-based task/time consolidation and initial drafting of procedural instructions explaining operations.
"Ollo Factory," a manufacturing-specialized work analysis AI that automates standard work form creation work analysis and procedural organization.
① Confirm movement and work segments in video.
Analyze work video to consolidate task elements and time. Verify scenes corresponding to diagram numbers, including walking, backtracking, and waiting, to evaluate layout proposals.

Official Ollo Factory demo screen. This differs from the unit assembly example in the text.
② Compile task sequence and confirmation points into the draft.
Generate procedures and explanations from video, and add/revise required confirmation points. The curriculum can retain complex sets or retrieval actions that are difficult to convey via layout diagrams.

Official Ollo Factory demo screen. This differs from the unit assembly example in the text.
This function does not automatically confirm layout diagrams based on measured field dimensions, safety ranges, or standard hand-hold approvals. It aligns with actual equipment layout.
Watch Ollo Factory’s Video Manual AI in Action
About the author
K.Y. | Business Development Lead & Marketing, Ollo Inc.
K.Y. leads business development and marketing at Ollo Inc., an AI startup originating from the Matsuo Laboratory at the University of Tokyo and the developer of Ollo Factory, a work analysis AI for manufacturing.
After studying engineering and design at university, K.Y. joined a major automaker and worked on new electric-vehicle development, from design through factory production, including hands-on assembly-line training. K.Y. later worked in sales and marketing at a manufacturing startup.
Today, K.Y. helps manufacturing teams use AI to improve the way they work through Ollo Factory.
Back to articles
Related articles
See how Ollo Factory can support your factory
Book a demo
• See the product in action
• Discuss your production needs
• Explore available plans
Book a demo

Request a brochure
• Customer stories
• Key features
• How to get started

