Published:
Lean Improvement
What Is Poka-Yoke? Error-Proofing Examples for Manufacturing

Even if you put warning labels on parts that are easily misaligned, the same mistakes can still happen when things are busy. Poka-yoke (error-proofing) is a method of preventing such mistakes not by relying solely on the worker's attention, but by using jigs, verification, and process conditions.
This article introduces the types of poka-yoke (error-proofing) used in manufacturing and provides specific examples in the unit assembly of automotive parts. It also explains the conditions to check before implementation.
- What is Poka-yoke? A system to prevent mistakes from happening or being overlooked.
- Procedure for considering poka-yoke (error-proofing) in manufacturing sites
- 1. Identify the mistakes you want to prevent and the conditions under which they occur.
- 2. Consider the structure that prevents occurrence.
- 3. Test even incorrect conditions and decide on the implementation.
- Specific examples of poka-yoke (error-proofing) in unit assembly.
- Positioning jig to prevent reverse placement
- Product number verification to prevent mix-ups
- Completion conditions to prevent forgetting to tighten.
- Things to check before adopting a poka-yoke (error-proofing) plan
- Do not confuse quality control poka-yoke (error-proofing) with safety measures.
- Summary: Choose poka-yoke based on the conditions under which it occurs and the conditions under which it can bypass.
- Ollo Factory is a manufacturing-specific AI for work analysis that supports everything from work analysis to procedure standardization.
- Visualize the differences from the manual using comparative analysis AI.
- Watch Ollo Factory’s Improvement Suggestions AI in Action
What is Poka-yoke? A system to prevent mistakes from happening or being overlooked.
Poka-yoke refers to mechanisms and techniques designed to prevent defects caused by careless mistakes or errors in judgment. It is also sometimes written as "poka-yoke". Examples include jigs that prevent parts from being inserted unless they are in the correct direction, and systems that do not complete the process until a specified number of bolts have been tightened.
When considering this, it's helpful to separate error prevention ( preventing incorrect operations from occurring in the first place) from detection and prevention ( detecting errors or incompleteness and preventing them from being passed on to subsequent processes) .
Approach to countermeasures | Example in unit assembly | Limits I want to confirm |
|---|---|---|
Make sure it can't be placed in the wrong direction. | Combining asymmetrical positioning pins and holes | Could it be that a different part number or wear on the jig could cause it to be inserted incorrectly? |
Error detected and cannot proceed. | The part numbers are checked, and the process proceeds only if they match. | How to handle incorrect labeling and skipped sections. |
Find incomplete | Correspond the number of completed contracts to the completion of each process. | Wouldn't tightening the same spot twice just count as making the required number of bolts? |
While signs and verbal cues can be helpful, they alone cannot physically prevent errors. The design must differentiate between enabling workers to choose the correct method without hesitation and ensuring they can recognize mistakes when they occur.
Procedure for considering poka-yoke (error-proofing) in manufacturing sites
1. Identify the mistakes you want to prevent and the conditions under which they occur.
You can't choose a system based solely on the objective of "improving quality." You need to decide what you want to prevent, such as "placing the housing upside down" or "installing similar brackets."
Next, we investigate conditions that are prone to errors, such as part number changes, resuming operations after interruptions, and work performed by support staff. We review work videos, actual products, and defect records, and also ask actual workers about any difficulties they encounter.
If defective products have already been released, do not wait for permanent countermeasures to be completed; instead, isolate, verify, and contact the relevant parties in accordance with the rules of the site.
2. Consider the structure that prevents occurrence.
If a jig can be placed upside down, before adding more warning signs, consider whether it can be designed to only be placed in the correct orientation. The less reliance there is on human memory, the easier it will be for different people to perform the work in the same way.
However, structural changes should not create new problems such as damaging parts, pinching fingers, or requiring excessive force to remove parts. Relevant departments will verify everything from product tolerances and jig wear to cleaning and maintenance, to emergency removal procedures.
If it's difficult to prevent this through structural means, we'll consider checking part numbers and verifying completion conditions. We'll also decide whether to simply issue an alarm or prevent the process from proceeding to the next step.
3. Test even incorrect conditions and decide on the implementation.
Simply confirming that the correct parts can be placed in the correct orientation is not enough for error-proofing. We must verify that the anticipated errors can be reliably detected in a safe manner.
Can it identify differences in target part numbers, reverse orientation, missing parts, etc.?
Are there any loopholes due to sensor or jig malfunctions, power outages/restarts, or part number changes?
Are there established procedures for isolation, communication, and return to work after detecting an anomaly?
Frequent false positives and usability issues in the field can lead to verification becoming merely a formality or even the system being disabled. Please review both the burden of normal operations and how abnormal situations are handled.
Specific examples of poka-yoke (error-proofing) in unit assembly.
Positioning jig to prevent reverse placement
If the mistake is placing a seemingly symmetrical housing upside down, consider positioning pins that correspond to the part's shape. These pins will prevent the housing from being secured in the wrong direction, ensuring that work can begin in the correct orientation.
The verification process isn't limited to orientation. We also check all applicable part numbers, tolerance ranges, pin wear and dirt, and ease of attachment and detachment. A rule is in place for inspection and replacement to prevent continued use of broken fixtures.
Product number verification to prevent mix-ups
If the mistake is due to mixing up similar parts, one solution is to separate the supply locations and verify the part numbers against the instruction information. Even with a label reading system, it's necessary to verify that the label itself is correct and to prevent contamination during replenishment.
We don't rely solely on color coding; we combine it with information such as part numbers and shapes. It's also important to ensure that no old parts remain when part numbers are changed.
Completion conditions to prevent forgetting to tighten.
When using a tool counting system, you must not only check that the number of tools matches, but also verify that the necessary fastening has been achieved at the target location. Test conditions that occur in actual work, such as tightening the same location twice or resuming counting after an interruption.
These are all examples for illustrative purposes. Specific equipment specifications and manufacturing conditions will be confirmed and determined by the production technology, quality, and safety personnel.
AI can be used to analyze videos to identify situations where mistakes occur and to create procedural manuals after corrective actions are taken. Quality and safety requirements are compared with on-site standards.
Things to check before adopting a poka-yoke (error-proofing) plan
Once a solution is developed, we will verify that it functions as intended not only when the work is done normally, but also when the orientation is wrong, the wrong part number is used, or parts are missing.
The mistakes we want to prevent and the conditions under which those mistakes occur.
Mechanisms for preventing and detecting errors, and conditions under which errors can slip through.
Impact on quality and safety, trial conditions, and verification results.
For example, with positioning pins, in addition to ensuring they cannot be inserted in the wrong direction, we also check for differences in target part numbers, tolerances, pin breakage, and the possibility of them being removed and reused. Please record the proposed countermeasures and verification results in the existing improvement records.
Do not confuse quality control poka-yoke (error-proofing) with safety measures.
Even if there is a mechanism to detect loose connections, it does not necessarily prevent contact with dangerous moving parts. Mechanisms for verifying quality and safety features for protecting people have different purposes and requirements.
The Ministry of Health, Labour and Welfare's guidelines on the functional safety of machinery and equipment also indicate an approach to ensuring safety based on reducing risks for the entire system. Do not modify or disable safety devices for the purpose of quality improvement.
Summary: Choose poka-yoke based on the conditions under which it occurs and the conditions under which it can bypass.
Identify the mistakes you want to prevent and consider structures that will prevent them from happening.
Decide how to stop, isolate, and contact after detection.
We will verify whether it is effective even in cases of different product numbers, interruptions, or equipment malfunctions.
Before considering poka-yoke (error-proofing), it's necessary to identify where hesitation or omissions occur in actual work. Classifying and comparing work videos with AI makes it easier to conduct such research and share any changes to the procedures.
Ollo Factory is a manufacturing-specific AI for work analysis that supports everything from work analysis to procedure standardization.
Ollo Factory uses AI to analyze work videos, classifying actions, comparing them to examples, and helping to consider improvement suggestions. By using comparative analysis AI , it helps identify cycles where errors occur and investigate the causes of errors by comparing them to the procedure manual.
Visualize the differences from the manual using comparative analysis AI.
The comparative analysis AI allows you to compare two work videos, such as one of a model and one of a newcomer, to identify differences in the time and movement of individual tasks. It can also identify cycles and sections containing error-proofing techniques from multiple cycles. By reviewing the video of the sections with differences, you can consider points for instruction and practice.

Ollo Factory provides comprehensive support, from on-site training to improvement, all within a single service.
If you are considering identifying or improving poka-yoke (error-proofing) systems , please refer to the Ollo Factory documentation.
Request information from Ollo Factory.
Watch Ollo Factory’s Improvement Suggestions AI in Action
About the author
K.Y. | Business Development Lead & Marketing, Ollo Inc.
K.Y. leads business development and marketing at Ollo Inc., an AI startup originating from the Matsuo Laboratory at the University of Tokyo and the developer of Ollo Factory, a work analysis AI for manufacturing.
After studying engineering and design at university, K.Y. joined a major automaker and worked on new electric-vehicle development, from design through factory production, including hands-on assembly-line training. K.Y. later worked in sales and marketing at a manufacturing startup.
Today, K.Y. helps manufacturing teams use AI to improve the way they work through Ollo Factory.
Back to articles
Related articles
See how Ollo Factory can support your factory
Book a demo
• See the product in action
• Discuss your production needs
• Explore available plans
Book a demo

Request a brochure
• Customer stories
• Key features
• How to get started

